DigiView™: Hardware you can trust.

Images showing one of Model DV3500's internal power supplies (right) and Auto Resetting Power input fuse (below)

No matter how careful you are with a logic analyzer, static zaps (ESD) are inevitable.

For this reason, we engineered DigiView with extra ESD protection on everything that connects to the outside world:

• ESD protected Channels.
• ESD protected USB lines.
• ESD protected Power lines.

Ever melt a lead by accidentally connecting it to a power rail?

You won't with DigiView.
Its ground leads are protected to +-12V
with  auto-resetting  protection circuits.

All of DigiView's channels are protected from overvoltage and reverse voltages (protection levels are model specific)

With the DigiView Logic Analyzer you also have an unrestricted power sequence. Whether its the PC, Device Under Test or the analyzer itself; any of these can be powered-up or powered-down without fear of accidentally causing damage.

• You also will not harm DigiView by connecting the Analyzer's channels to the wrong voltage level. All of DigiView's channels are protected from overvoltage and reverse voltages (protection levels are model specific).
• Ever have to be especially carefull to power everything in a specific sequence? With the DigiView Logic Analyzer you have an unrestricted power sequence. Whether its the PC, Device Under Test or the analyzer itself ; any of these can be powered-up or powered-down without fear of accidentally causing damage.
• DigiView's hardware performance is not dependant on the PC load, speed or memory. True "store and forward" architecture guarantees full bandwidth capturing at full sample rate under all conditions.
• Probe leads are built with the best materials: ultra-flexible 66 strand wire for ease of use and durability; insulated connectors for side and end stacking on .1 centers while providing stress relief to the wires; fully connectorized for easy replacement or leaving leads attached to a target.