Download
Software
Users Guide
Each model of DigiView has a different set of options that can be adjusted directly from the software. These options are shown summarized below.
Model DV1-100 Hardware Options
Auto Prefill - Enable this option to use up to 50% of the buffer for pre-trigger capture data. Disable if pre-trigger capture is not desired.Model DV3400 Hardware Options
Sample Mode - Select the sample rate and
channel mode.
Buffer Size - Adjust the amount of
capture buffer (1% - 100%). When operating in "Continuous Run Mode", you may
want to reduce the buffer size to a lower setting to achieve faster
performance.
Minimum Post-Trigger Buffer - Adjust the
amount of buffer to reserve for data captured after the trigger event.
Channel Monitor - This area displays the channel /
color relationship and each channel's relative activity.
Trigger Thresholds - Select the trigger threshold for
each group of 18 Channels. The selection can be made by highlighting one of the
pre-defined values or use the slider beneath these values to select a custom
value. The valid range for each threshold is -6V to +6V.
